O & HO Scale Detail Parts Price List
Foothill Model Works is proud to be a dealer for MacLeod Western’s superb line of western narrow gauge trucks and detail parts in O and HO Scale. Long known to veteran narrow gauge modelers and no stranger to our customers, Foothill Model Works is helping to make this scratch builder’s paradise more accessible to the public. The following is our current price and availability list. A PDF file of our printed order form for MacLeod Western’ products is also available.
Note: All of the following parts are O Scale, injection molded styrene, unless otherwise noted; detail part sets include enough parts (parts list as noted) to make one car; trucks include enough parts to make one pair of trucks, are sold without wheels, screws, or brake beams, and are 3′ gauge, unless otherwise noted (some trucks can be 30″ gauge, inquire before ordering). MacLeod Western trucks (in general, T-11/T-12 shown) assemble as follows:
Side frame assembly should not be glued to bolster and should rotate freely.
| Part No. |
Description |
Price |
|---|---|---|
| B-47A |  15″/6 Spoke Logging Brake Wheel w/ratchet & pawl, ABS |
$3.00 pr. |
| B-48A |  16″/6 Spoke Logging Brake Wheel w/ratchet & pawl, V&T, SP, NCNG, ABS |
$3.00 pr. |
| B-48S |  16″/6 Spoke Logging Brake Wheel w/ratchet & pawl, V&T, SP, NCNG, Styrene |
$3.00 pr. |
| B-49A |  16″/5 Spoke Brake Wheel w/ratchet & pawl, SRRL, ABS |
$3.00 pr. |
| B-51 |  Brake Rod Clevises. 5, 2″ wide. 5, 1.5″ wide. - New |
$3.00 set |
| B-1045 |  16″/6 Spoke Brake Wheel w/ratchet & pawl, V&T, SP, NCNG, Brass |
$6.00 pr. |
| C-49 | Climax Cab (Cab front, sides, & back) | $10.00 set |
| C-1004 | NCNG #8/D&RGW #283 Boiler front, Brass | $5.00 ea. |
| C-6036P |  Baldwin Cab & Mouldings, early (Cab front, sides, back, & roof mouldings) |
$15.00 set |
| D-21 |  Baggage Doors, SPng #467, SPC #47 |
$3.00 pr. |
| D-22 |  End Doors, SPng #467, SPC #47 |
$3.00 pr. |
| D-31 |  Baggage Doors, V&T #13 |
$3.00 pr. |
| D-32 |  End Doors, V&T #13 & #14 |
$3.00/4 |
| D-3000 |  NCNG Flat Cars #15-29 Hardware Detail Set (NBW castings, truss rod NBW, & stake pockets) |
$7.00 set |
| D-3001 |  NCNG Box Car #32 Hardware Detail Set (Door latches, door guides, corner plates, tie rod plates, truss rod NBW, roofwalk supports, & queen posts) |
$7.00 set |
| D-3002 |  SRRL Caboose #556-558 Hardware Detail Set (Windows, cupola, carlines, doors, catwalk supports, & queen posts) |
$25.00 set |
| D-3004 |  SPC Ventilated Box Car Detail Set, Full Vent Door (Door hardware, doors, brake staff hardware, brake wheel, corner plates, tie rod plates, roofwalk supports, & queen posts) |
$21.00 set |
| D-3005 |  SPC Ventilated Box Car Detail Set, Half Vent Door (Door hardware, doors, brake staff hardware, brake wheel, corner plates, tie rod plates, roofwalk supports, & queen posts) |
$21.00 set |
| D-3006 |  SPC 24′ & 28′ Box Car Hardware Detail Set (Door hardware, doors, brake staff hardware, brake wheel, corner plates, tie rod plates, roofwalk supports, & queen posts) |
$16.00 set |
| D-6034P |  Baldwin Domes, 21″ Sand Dome, 26″ Steam Dome, early |
$10.00 set |
| Gb-1005 | Glenbrook Boiler Front, C&TL&F, LTRy, Brass | $5.00 ea. |
| N-7 |  1 1/2″ Nuts, hex, no washer |
$3.00/78 |
| N-8 |  2″ Nuts, hex, no washer |
$3.00/78 |
| N-9 |  1 1/2″ Nuts, square, no washer |
$3.00/78 |
| N-23 |  1 5/16″ Nuts, square, 3 5/16″ web washers, used on WSLCo |
$3.00/32 |
| N-24 |  1″ Nuts, square, 2 5/8″ cast web washers, used on WSLCo |
$3.00/32 |
| N-25 |  1 1/2″ Nuts, square, 4″ web washers, used on WSLCo |
$3.00/32 |
| N-26 |  2″ Nuts, large rectangular & elliptical washers, used on WSLCo |
$3.00/16 |
| N-28 |  1 3/4″ Nuts, hex, no washer |
$3.00/40 |
| N-44 |  Nuts w/Teardrop Washers, for body bolster tie rod, Carter Brothers, Hammond |
$3.00/34 |
| N-46 |  Grab Iron Ends |
$3.00/16 |
| N-1010 | Climax Driver Center for 28″ Tires, Brass | $20.00/8 |
| Q-20 |  12″ Queen Posts |
$3.00/16 |
| Q-34 |  1/2″ Flat Queen Posts |
$3.00/32 |
| R-5 |  Box Car Door Latches, NCNG |
$3.00/6 |
| R-6 |  NCNG Box Car #32-76 detail parts (Door guides, corner plates, tie rod plates, truss rod NBW, & queen posts) |
$3.00 set |
| R-40 |  24″ Roofwalk Support Ribs |
$3.00/24 |
| R-41 |  18″ Roofwalk Support Ribs |
$3.00/32 |
| R-42 |  15″ Roofwalk Support Ribs |
$3.00/32 |
| R-43 |  21″ Roofwalk Support Ribs |
$3.00/24 |
| S-35 |  NCNG Stake Pockets |
$3.00/18 |
| T-1 |  D&RGW, 3′ ga., 3′ 7″ w/b, freight truck |
$8.50 pr. |
| T-2 |  Carter Bros., 3′ ga., 4′ w/b, swing motion truck, NCNG |
$8.50 pr. |
| T-3 |  Carter Bros., 3′ ga., 4′ w/b, swing motion truck, WSLCo, SPC, NPC |
$8.50 pr. |
| T-4 |  Bettendorf Cast Steel truck, 3′ ga., C&S, RGS, WP&Y |
$8.50 pr. |
| T-10 |  Arch Bar truck, 3′ ga., 5′ w/b, SPng, NCO, NC, NCNG Tank Cars |
$8.50 pr. |
| T-11 | SLCo, WSLCo, 3′ ga., 3′ 7″ w/b, III-B, 3 spring, arch bar truck | $8.50 pr. |
| T-12 |  WSLCo, 3′ ga., 3′ 7″ w/b, III-B, 2 spring, arch bar truck |
$8.50 pr. |
| T-14 |  SPC, 3′ ga., 4′ w/b, arch bar truck |
$8.50 pr. |
| T-15 |  SPC, 3′ ga., 3′ 7″ w/b, wide bolster, arch bar truck |
$8.50 pr. |
| T-16 |  SPC, 3′ ga., 3′ 7″ w/b, narrow bolster, arch bar truck |
$8.50 pr. |
| T-17-1 |  WSLCo, 3′ ga., 4′ w/b, 1 spring, arch bar truck |
$8.50 pr. |
| T-17-1-30 |  WSLCo, 30″ ga., 4′ w/b, 1 spring, arch bar truck |
$8.50 pr. |
| T-17-2 |  WSLCo, 3′ ga., 4′ w/b, 2 spring, arch bar truck |
$8.50 pr. |
| T-17-52 |  WSLCo, 30″ ga., 4′ w/b, 2 spring, arch bar truck |
$8.50 pr. |
| T-17-3 |  WSLCo, 3′ ga., 4′ w/b, 3 spring, arch bar truck |
$8.50 pr. |
| T-52 |  Russel Arch Bar Truck, 3′ ga. or 30″ ga. |
$8.50 pr. |
| T-501 |  Arch Bar Truck, 3′ ga., 5′ w/b, SPC, NCO, NC, NCNG Tank Cars, HOn3 |
$6.00 pr. |
All text, images, and drawings ©2008, Foothill Model Works.
All prices are suggested retail. Prices and specifications are subject to change.
Sorry, no dealers on MacLeod Western parts.
Revised 3/28/09.